LM5111-1M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5111-1M Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is indicated.In the direction of Surface Mount, gate drivers is mounted.WGate driversh a 3.5V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.Its configuration is based on a total of 8 terminations.You will find various related parts under the base part number LM5111.Mosfet driver is mounted using Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is a maximum output current of 5A that can be achieved.The board has a total of 8 component pins.In terms of its basis, there are 2 outputs integrated.The device is capable of delivering a current of 5A.Keeping the supply current at 2mA ensures greater stability.When this part is unaffected by external factors, its quiescent current at 1mA should be considered.
LM5111-1M Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-1M Applications
There are a lot of Texas Instruments LM5111-1M gate drivers applications.
- Head-up and Head mounted displays
- Motor Controls
- LCD/LCoS/DLP portable and embedded pico projectors
- Pulse transformer drivers
- UPS systems
- Isolated Gate Driver Supplies
- DC/DC converters
- Telecom switch mode power supplies
- Industrial Power Supplies
- Industrial Modules
