LM5111-1M/NOPB
| Parameters | |
|---|---|
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Element Configuration | Dual |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Release Time | 12 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
LM5111-1M/NOPB Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.Tube represents the package.The device is mounted in the direction of Surface Mount.In the absence of a power supply voltage of 3.5V~14V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.Under its base part number LM5111, various related parts can be found.Mosfet driver is mounted using Surface Mount.The pins are configured with 8 when designing the chip.A voltage of 12V is required for its operation.In this case, BUFFER OR INVERTER BASED PERIPHERAL DRIVER serves as the interface IC.5A is the maximum output current.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.This device is capable of delivering 5A current.In order to ensure greater stability, it is recommended to keep the supply current at 2mA.Its quiescent current at 1mA refers to the current this part consumes on the condition of not being affected by external factors.
LM5111-1M/NOPB Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-1M/NOPB Applications
There are a lot of Texas Instruments LM5111-1M/NOPB gate drivers applications.
- RGB applications
- Power factor correction (PFC) circuits
- Video amplifiers
- Isolated Supplies for Motor Control
- Pulse transformer drivers
- Motor Control
- DC-DC Converters
- Topologies
- Isolated Supplies for controller area network (CAN),
- AC-DC Inverters
