LM5111-1MX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5111-1MX/NOPB Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A package of Tape & Reel (TR) has been used.It's mounted on the way to Surface Mount.Using a 3.5V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel MOSFET in this design.This device can operate at temperatures up to -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.Its configuration starts with 8 terminations.Many related parts can be found under its base part number LM5111.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.The interface chip of the system is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.5A is the maximum output current.The board contains 8 pins for component connections.For its basis, there are 2 outputs integrated.The output current of this device can be set to 5A.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.Its quiescent current at 1mA refers to the current this part consumes on the condition of not being affected by external factors.
LM5111-1MX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-1MX/NOPB Applications
There are a lot of Texas Instruments LM5111-1MX/NOPB gate drivers applications.
- Automotive Applications
- High-voltage isolated DC-DC converters
- High power buffers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Multicolor LED/laser displays
- High frequency line drivers
- Topologies
- Isolated Gate Driver Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- DC-DC Converters
