LM5111-1MY
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
LM5111-1MY Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Tape & Reel (TR) is the form of the package.For its configuration, it incorporates 2 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 3.5V~14V, it can demonstrate its superiority.This gate type has a N-Channel MOSFET design.This device can operate at temperatures up to -40°C~125°C TJ.Non-Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.Many related parts can be found under its base part number LM5111.Mosfet driver is mounted using Surface Mount.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 12V.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.There is a maximum output current of 5A that can be achieved.The number of component pins is 8.5A is the maximum output current supported by the device.As a precaution, make sure the supply current is kept at 2mA.
LM5111-1MY Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5111-1MY Applications
There are a lot of Texas Instruments LM5111-1MY gate drivers applications.
- Welding
- High-voltage isolated DC-DC converters
- Portable Media Players
- Topologies
- Portable Navigation Devices
- Commercial air-conditioning (CAC)
- Video amplifiers
- Industrial motor drives - compact, standard, premium, servo drives
- Refrigerator
- Commercial and agricultural vehicles (CAV)
