LM5111-1MYX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Input Type | Non-Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5111-1MYX Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.Tape & Reel (TR) is the form of the package.The configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.5V~14V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as its input type.Mosfet driver is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5111.In this case, Surface Mount indicates how the device is mounted.When designing, the device is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.As its interface IC, BUFFER OR INVERTER BASED PERIPHERAL DRIVER is being employed.A total of 8 pins are available for component connections.Mosfet driver supports an output current of 5A.As a precaution, make sure the supply current is kept at 2mA.
LM5111-1MYX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5111-1MYX Applications
There are a lot of Texas Instruments LM5111-1MYX gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Industrial motor drives - compact, standard, premium, servo drives
- Active filtering
- A/D drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- 3-Phase Motor Inverter Driver
- Dual-Battery Systems
- Motor controllers
- Solar inverters
- AC-DC Inverters
