LM5111-1MYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5111-1MYX/NOPB Overview
In order to increase flexibility, the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is used.Tape & Reel (TR) is the form of the package.Surface Mount is mounted in the way.A supply voltage of 3.5V~14V demonstrates its superiority.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is used as the input type.Its configuration starts with 8 terminations.There are numerous related parts listed under its base part number LM5111.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.This device operates with 12V supply voltage.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED PERIPHERAL DRIVER as Mosfet drivers interface chip.There is a maximum output current of 5A.A total of 8 pins are available for component connections.For its basis, 2 outputs are integrated.The output current can be set to 5A.As a precaution, make sure the supply current is kept at 2mA.
LM5111-1MYX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
LM5111-1MYX/NOPB Applications
There are a lot of Texas Instruments LM5111-1MYX/NOPB gate drivers applications.
- Dual-Battery Systems
- Multicolor LED/laser displays
- Isolated Gate Driver Supplies
- serial peripheral interface (SPI), I2C
- Video amplifiers
- Portable computers
- Automotive Applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar power supplies
- 3-Phase Motor Inverter Driver
