LM5111-2M
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.45mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
LM5111-2M Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is packaged in the way of Tube.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 3.5V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Inverting is used as the input type.There are 8 terminations to form the base of its configuration.There are various parts that can be found under its base part number LM5111.In this case, Surface Mount indicates how the device is to be mounted.When the device is designed, it has 8 pins.This device operates with 12V supply voltage.In this case, BUFFER OR INVERTER BASED PERIPHERAL DRIVER serves as the interface IC.Mosfet driver is possible for the output current to be as low as 5A.A board with 8 component pins is available.The output current of this device can be set to 5A.For higher stability, the supply current should be kept at 2mA.Its quiescent current at 1mA refers to the amount of current it consumes when unaffected by external factors.
LM5111-2M Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-2M Applications
There are a lot of Texas Instruments LM5111-2M gate drivers applications.
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Automotive Applications
- Isolated Gate Driver Supplies
- Isolated Supplies for Motor Control
- Portable Media Players
- Refrigerator
- DC/DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Video amplifiers
