LM5111-2M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Release Time | 12 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5111-2M/NOPB Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.There is a package in the form of Tube.The device is mounted in the direction of Surface Mount.When the supply voltage is 3.5V~14V it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type is Inverting.The configuration starts with 8 terminations.You will find various related parts under the base part number LM5111.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.In this case, BUFFER OR INVERTER BASED PERIPHERAL DRIVER serves as the interface IC.There is an output current limit of 5A for this device.There are 8 component pins on the board.Based on its basis, it integrates 2 outputs.Mosfet gate drivers can deliver a current of 5A.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5111-2M/NOPB Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-2M/NOPB Applications
There are a lot of Texas Instruments LM5111-2M/NOPB gate drivers applications.
- General Purpose 3-Phase Inverter
- High frequency line drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Multicolor LED/laser displays
- Active filtering
- Dual-Battery Systems
- Motor Controls
- Isolated switch mode power supplies (SMPS)
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
