LM5111-2MX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
LM5111-2MX Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 3.5V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel MOSFET is designed for it.Temperature range -40°C~125°C TJ is allowed for this device.Mosfet driver uses Inverting as Mosfet drivers input type.It's configured with 8 terminations.Numerous related parts can be found under its base part number LM5111.In this case, Surface Mount indicates how the device is mounted.There are 8 pins available in the device.The device is specifically designed to function with a supply voltage of 12V V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In the maximum case, the output current can be limited to 5A.Components with 8 pins are available.To ensure high stability, the supply current should be kept at 2mA.When not affected by external factors, this part consumes its quiescent current at 1mA.
LM5111-2MX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-2MX Applications
There are a lot of Texas Instruments LM5111-2MX gate drivers applications.
- DC-DC Converters
- Active filtering
- Commercial air-conditioning (CAC)
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Telecom switch mode power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- Digitally controlled power supplies
- High-speed communications
