LM5111-3M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5111-3M Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A package of Tube has been used.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.5V~14V.The gate type on this device is N-Channel MOSFET.For this device, the temperature range is -40°C~125°C TJ.Input type of Inverting, Non-Inverting is used.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number LM5111.Mounting the device requires Surface Mount.When the device is designed, it has 8 pins.A voltage of 12V is required for its operation.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.In the maximum case, the output current can be 5A volts.The board contains 8 pins for component connections.Mosfet gate drivers supports a current output of 5A.Keeping the supply current at 2mA ensures greater stability.A quiescent current of 1mA is the current consumed by a part when left unaffected by external influences.
LM5111-3M Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 1mA
LM5111-3M Applications
There are a lot of Texas Instruments LM5111-3M gate drivers applications.
- Commercial air-conditioning (CAC)
- White Goods - Air Conditioner, Washing Machine,
- Motor Controls
- Portable Navigation Devices
- PCMCIA applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- General Purpose 3-Phase Inverter
- Isolated Supplies for Motor Control
- Portable computers
- Solar inverters
