LM5111-3MY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5111 |
| Pin Count | 8 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Built-in Protections | OVER VOLTAGE |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5111-3MY Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.Tape & Reel (TR) represents the package.This configuration includes 2 drivers.The device is mounted in the direction of Surface Mount.In the absence of a power supply voltage of 3.5V~14V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.The configuration is based on 8 terminations.Numerous related parts can be found under its base part number LM5111.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.A voltage of 12V is required for its operation.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.There is an output current limit of 5A for this device.The board contains 8 pins for component connections.Mosfet driver supports an output current of 5A.If you want a stable supply current, you should keep it at 2mA.
LM5111-3MY Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5111-3MY Applications
There are a lot of Texas Instruments LM5111-3MY gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- White Goods - Air Conditioner, Washing Machine,
- Solar inverters
- Motor controllers
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial air-conditioning (CAC)
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for Motor Control
- DC/DC converters
- Isolated switch mode power supplies (SMPS)
