LM5111-3MY/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5111 |
| Max Output Current | 5A |
| Nominal Supply Current | 2mA |
| Output Current | 5A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.04 µs |
| Height Seated (Max) | 1.09mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5111-3MY/NOPB Overview
In order to increase flexibility, the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is used.The packaging method is indicated by Tape & Reel (TR).There are 2 drivers installed for this device.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 3.5V~14V.The gate type on this device is N-Channel MOSFET.Temperature range -40°C~125°C TJ is allowed for this device.Inverting, Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.Many related parts can be found under its base part number LM5111.Devices are mounted by Surface Mount.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 12V volts of power.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 5A.An output current of 5A is supported.Mosfet gate drivers is recommended to keep the supply current at 2mA to ensure greater stabilMosfet gate driversy.
LM5111-3MY/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5111-3MY/NOPB Applications
There are a lot of Texas Instruments LM5111-3MY/NOPB gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Commercial air-conditioning (CAC)
- Commercial and agricultural vehicles (CAV)
- Topologies
- Isolated switch mode power supplies (SMPS)
- Smart Phones
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- Refrigerator
- AC-DC Inverters
