LM5112MY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5112 |
| Pin Count | 8 |
| Output Voltage | 15V |
| Max Output Current | 7A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 14ns |
| Fall Time (Typ) | 12 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 7A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 7A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.04 µs |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5112MY Overview
In order to increase flexibility, the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is used.The packaging method is indicated by Tape & Reel (TR).This configuration includes 1 drivers.The device is mounted in the direction of Surface Mount.WGate driversh a 3.5V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~125°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.It's configured with 8 terminations.The base part number LM5112 refers to a number of related parts.The device is mounted using Surface Mount.A total of 8 pins are available on the device.The device is specifically designed to operate at 12V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 7A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 8 pins are available for component connections.3A is the maximum output current supported by the device.The supply current should be kept at 2mA to ensure higher stability.In this case, the voltage is 15V.
LM5112MY Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5112MY Applications
There are a lot of Texas Instruments LM5112MY gate drivers applications.
- DC-DC Converters
- Multicolor LED/laser displays
- A/D drivers
- Active filtering
- Isolated Gate Driver Supplies
- Industrial Modules
- Solar power supplies
- Portable Navigation Devices
- Pulse transformer drivers
- Solar inverters
