LM5112MYX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5112 |
| Pin Count | 8 |
| Nominal Supply Current | 2mA |
| Output Current | 7A |
| Max Supply Current | 2mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 12 ns |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 7A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 7A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.04 µs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5112MYX Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package is adopted for higher flexibility.Gate drivers is package in Tape & Reel (TR) case.For its configuration, it incorporates 1 drivers.It's mounted on the way to Surface Mount.When the supply voltage is set to 3.5V~14V, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.Temperature range -40°C~125°C TJ is allowed for this device.Input type of Inverting, Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various related parts under its base part number LM5112.In this case, Surface Mount indicates how the device is mounted.At the time of design, it is configured with 8 pins.A supply voltage of 12V is required for operation.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 8 component pins.The output current supported by the device is 7A.As a precaution, make sure the supply current is kept at 2mA.
LM5112MYX Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
LM5112MYX Applications
There are a lot of Texas Instruments LM5112MYX gate drivers applications.
- Telecom switch mode power supplies
- Pulse transformer drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Gate Driver Supplies
- Refrigerator
- Dual-Battery Systems
- Solar inverters
- Line drivers
- Industrial Modules
- Motor controllers
