LM5112MYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 3.5V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5112 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 7A |
| Nominal Supply Current | 2mA |
| Output Current | 7A |
| Max Supply Current | 2mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 14ns |
| Fall Time (Typ) | 12 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 14ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 7A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 7A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.3V |
| Turn Off Time | 0.04 µs |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5112MYX/NOPB Overview
There is greater flexibility with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.There is a package in the form of Tape & Reel (TR).Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 3.5V~14V supply voltage.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Input type of Inverting, Non-Inverting is used.It's configured with 8 terminations.You will find various related parts under the base part number LM5112.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 7A can be achieved at maximum power.There are various useful electronic components in its subcategory MOSFET Drivers.The board contains 8 pins for component connections.The basis of this model has 1 outputs integrated.The output current supported by the device is 7A.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.
LM5112MYX/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
LM5112MYX/NOPB Applications
There are a lot of Texas Instruments LM5112MYX/NOPB gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated switch mode power supplies (SMPS)
- Head-up and Head mounted displays
- Commercial and agricultural vehicles (CAV)
- Portable computers
- Solar power supplies
- Digitally controlled power supplies
- UPS systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High current laser/LED systems
