LM5113SDX/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5113 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 5A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 100μA |
| Output Current | 5A |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 ns |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 4ns |
| Fall Time (Typ) | 4 ns |
| Turn-Off Delay Time | 2 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7ns 1.5ns |
| Channel Type | Independent |
| Turn On Time | 0.045 µs |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.76V 1.89V |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 107V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5113SDX/NOPB Overview
For greater flexibility, its 10-WDFN Exposed Pad package is used.A packaging method of Cut Tape (CT) is indicated.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is set to 4.5V~5.5V, it can demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 10 terminations.You will find various related parts under the base part number LM5113.In this case, Surface Mount indicates how the device is mounted.In the device, there are 10 pins.In addition, it is specifically designed to operate with a supply voltage of 5V.5A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There can be a voltage up to 107V on the high-side (Bootstrap).The basis has 2 integrated outputs.The device is capable of delivering a current of 5A.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.Mosfet gate drivers is recommended that you set the operating supply voltage to 5V.
LM5113SDX/NOPB Features
Embedded in the Cut Tape (CT) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 107V
LM5113SDX/NOPB Applications
There are a lot of Texas Instruments LM5113SDX/NOPB gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Motor Control
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Media Players
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- Industrial Power Supplies
- Multicolor LED/laser displays
- General Purpose 3-Phase Inverter
