LM5116MH
| Parameters | |
|---|---|
| Frequency - Switching | 200kHz 535kHz |
| Max Input Voltage | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 98 % |
| Duty Cycle | 98 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | LM5116 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 6V~100V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Max Output Voltage | 80V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
LM5116MH Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 6V~100V and has a 6V~100V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. This switching controller can switch at 200kHz 535kHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . The 20 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. You can find other relevant dc to dc converter ics by searching "LM5116". In total, switching converter has 20 pins. Statistically, DC regulator outputs 80V volts. You should note down the dc dc regulator's usual output current of 20A when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 1MHz Hz. In a dormant state, the dc switching uses 4.6mA. Since the dc switcher's maximum input voltage is 100V, the voltage must be regulated accordingly. As per its datasheet, the switching converter has a maximum output of 80V volts.
LM5116MH Features
Transistor Driver Outputs
Switching Frequency: 200kHz 535kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
Frequency: 1MHz
LM5116MH Applications
There are a lot of Texas Instruments LM5116MH DC to DC converter applications.
- Alternators
- Mobile phones
- Hydrogen power
- Product testing
- Game consoles
- Packaging
- Overvoltage protection circuits in TV sets
- Combined machine tools
- Refrigerators of central air conditioners
- Hydro power
