LM5116MHX
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Feature | UVLO |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5116 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 6V~100V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 98 % |
| Duty Cycle | 98 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5116MHX Overview
With a 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. 6V~100V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz 535kHz. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 20 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. You can find other relevant dc to dc converter ics by searching "LM5116". There are only 20 pins on switching converter. The minimum input voltage of the dc dc voltage regulator should be 6V. Statistically, the DC regulator outputs 80V voltage. It's important to remember that the dc dc regulator's normaloutput current is 3.5A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1MHz for this dc regulators. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. When the dc switching is dormant, it uses 4.6mA.
LM5116MHX Features
Transistor Driver Outputs
Switching Frequency: 200kHz 535kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
LM5116MHX Applications
There are a lot of Texas Instruments LM5116MHX DC to DC converter applications.
- Surface processing equipment
- Flaw detection equipment
- Industrial robots
- Bending machines
- Linear guide
- Wide-range voltage regulation circuits
- Electrical distribution systems
- Electric heating, lighting
- Various precision measuring instruments
- Driver circuits
