LM5116WG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CSOIC (0.275, 7.00mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | LM5116 |
| Function | Step-Down |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 100V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4.6mA |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 6V~100V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 98 % |
| Isolation | Non-Isolated |
| Number of Output Phases | 1 |
| Height | 2.591mm |
| Length | 13.716mm |
| Width | 7.239mm |
| Thickness | 1.905mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5116WG/NOPB Overview
With a 20-CSOIC (0.275, 7.00mm Width) package, the switching controller is suitable for a wide range of applications. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. 6V~100V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. There is a switch at 200kHz 535kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Ramp, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 20 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 48V. A search for "LM5116" will reveal other relevant dc to dc converter ics. 20 pins are present on switching converter. An input voltage of 6V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 80V voltage. normally, the dc dc regulator's output current is 3.5A, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 98 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 100V. During dormancy, the dc switching uses 4.6mA. It runs on a 4.6mA supply current. Switches with 1 phases are used in this controller.
LM5116WG/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 535kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
LM5116WG/NOPB Applications
There are a lot of Texas Instruments LM5116WG/NOPB DC to DC converter applications.
- Network technology
- USB circuits
- Boring machines
- Various CNC machine tools
- Correction machines
- Series voltage regulation circuits
- Game consoles
- Digital video recorders
- Solar power plants
- Linear guide
