LM5117PMHE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117PMHE/NOPB Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 5.5V~65V voltage are supplied and operated. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 200kHz 480kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. An array of 20 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. In addition to "LM5117", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 20 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 800mV voltage based on test statistics. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 530kHz is the maximum frequency of this dc regulators. A dc switching in a dormant state uses 4.8mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 65V due to the dc switcher's maximum input voltage. 5.5V is the required supply voltage.
LM5117PMHE/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5117PMHE/NOPB Applications
There are a lot of Texas Instruments LM5117PMHE/NOPB DC to DC converter applications.
- Planers
- Die casting equipment
- Hydraulic presses
- Remotely powered electric motors
- Adjustable voltage or current linear circuits
- Overvoltage protection circuits in TV sets
- Post equipment
- Wide-range voltage regulation circuits
- Computer-related products
- Magnetohydrodynamic power
