LM5117PMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117PMHX/NOPB Overview
With a 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. 5.5V~65V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 200kHz 480kHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Frequency Control, Ramp, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 20 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. Other relevant dc to dc converter ics will be returned if you search "LM5117". 20 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 800mV. You should note down the dc dc regulator's usual output current of 3.3A when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. It is estimated that this dc regulatorhas a maximum frequency of 530kHz. In a dormant state, the dc switching uses 4.8mA. The dc switcher's maximum input voltage is 65V; users must limit it accordingly. Voltage 5.5V is needed for the supply.
LM5117PMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5117PMHX/NOPB Applications
There are a lot of Texas Instruments LM5117PMHX/NOPB DC to DC converter applications.
- Household control circuits
- Boring machines
- Computed tomography (CT)
- Scientific research
- Television equipment
- Gear/thread machining machines
- Emergency lighting monitoring equipment
- Computer application technology
- Geothermal power
- Mobile phones
