LM5117PSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PROGRAMMABLE OUTPUT FROM 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117PSQ/NOPB Overview
With its 24-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 5.5V~65V volts and has 5.5V~65V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 200kHz 480kHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. A variety of 24 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 48V. You can find other relevant dc to dc converter ics by searching "LM5117". The switching converter has a total of 24 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 530kHz for this dc regulators. In order to satisfy the need, DC to DC voltage regulator has a value of PROGRAMMABLE OUTPUT FROM 0.8V. In a dormant state, the dc switching uses 4.8mA. The dc switcher's maximum input voltage is 65V; users must limit it accordingly. A voltage of 5.5V is required for the supply.
LM5117PSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
PROGRAMMABLE OUTPUT FROM 0.8V
LM5117PSQ/NOPB Applications
There are a lot of Texas Instruments LM5117PSQ/NOPB DC to DC converter applications.
- Low output voltage switching power supply circuits
- Smoke exhaust equipment
- Industrial robots
- SMT equipment
- PSRR circuits
- Current source circuits
- Solar power plants
- Adjustable voltage or current linear circuits
- Balance equipment
- Printing equipment
