LM5117QPMHE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117QPMHE/NOPB Overview
In the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 5.5V~65V and has a 5.5V~65V supply voltage. Suitable for work in a -40°C~125°C TJ dc switcher. Switching can be done at 200kHz 480kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 20 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. LM5117 can be searched for other relevant dc to dc converter ics. 20 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 800mV voltage. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 530kHz on this dc regulators. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family. In dormant mode, 4.8mA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 65V. Voltage 5.5V is needed for the supply.
LM5117QPMHE/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5117QPMHE/NOPB Applications
There are a lot of Texas Instruments LM5117QPMHE/NOPB DC to DC converter applications.
- Direct power supply system
- Serial communication converter
- Window air conditioners
- Telecommunications equipment
- Injection molding machinery
- Linear guide
- Computed tomography (CT)
- Electric heating, lighting
- Alternators
- Digital precision reference circuits
