LM5117QPMHX/NOPB
| Parameters | |
|---|---|
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Max Input Voltage | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
LM5117QPMHX/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 20-PowerTSSOP (0.173, 4.40mm Width) package. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 5.5V~65V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 200kHz 480kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 20 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. You can find other relevant dc to dc converter ics by searching "LM5117". 20 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. A 800mV voltage of DC regulator was detected in the test statistics. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 530kHz. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series. DC switching uses 4.8mA when it is dormant. Because the dc switcher's maximum input voltage is 65V users must limit the voltage accordingly. A voltage of 5.5V must be present in the supply.
LM5117QPMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5117QPMHX/NOPB Applications
There are a lot of Texas Instruments LM5117QPMHX/NOPB DC to DC converter applications.
- Refrigerators of central air conditioners
- CNC system
- Production lines
- Emergency lighting monitoring equipment
- Linear guide
- Analog precision reference circuits
- Product testing
- Solar power plants
- Communication system
- Surge protection circuits
