LM5117QPSQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PROGRAMMABLE OUTPUT FROM 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117QPSQE/NOPB Overview
In the 24-WFQFN Exposed Pad package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 5.5V~65V. Worked in an dc switcher with a -40°C~125°C TJ rating. A switching controller such as this can switch at a value of 200kHz 480kHz . dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position QUAD . A variety of 24 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. A search for "LM5117" will reveal other relevant dc to dc converter ics. In total, switching converter has 24 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 5.5V as the minimum input voltage of dc dc voltage regulator. This dc to dc regulator accepts only 65V input voltage at most. The max frequency of the pmic can reach 530kHz. DC to DC voltage regulator has the value of PROGRAMMABLE OUTPUT FROM 0.8V to better satisfy the requirement. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. The dc switching utilizes 4.8mA when it is in a dormant state.
LM5117QPSQE/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
PROGRAMMABLE OUTPUT FROM 0.8V
LM5117QPSQE/NOPB Applications
There are a lot of Texas Instruments LM5117QPSQE/NOPB DC to DC converter applications.
- Hydro power
- Driver circuits
- Nuclear power plants
- Milling machines
- Direct power supply system
- Remotely powered electric motors
- Grinders
- Surge protection circuits
- Textile machinery
- Game consoles
