LM5117QPSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PROGRAMMABLE OUTPUT FROM 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 480kHz |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 99 % |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5117QPSQ/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 24-WFQFN Exposed Pad package. For outputs of 1, this dc motor controller is suitable. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 5.5V~65V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. There is a switch at 200kHz 480kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position QUAD . The 24 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 48V. In addition to "LM5117", there are other relevant dc to dc converter ics you can find. There are only 24 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 5.5V. At most, the dc to dc regulator accepts 65V input voltage. There is a maximum frequency of 530kHz for this dc regulators. DC to DC voltage regulator has a value of PROGRAMMABLE OUTPUT FROM 0.8V to better satisfy the need. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. A dc switching in a dormant state uses 4.8mA.
LM5117QPSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 480kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
PROGRAMMABLE OUTPUT FROM 0.8V
LM5117QPSQ/NOPB Applications
There are a lot of Texas Instruments LM5117QPSQ/NOPB DC to DC converter applications.
- Die casting equipment
- seismic instrument power circuits
- Automation technology
- Low output voltage switching power supply circuits
- Mobile phones
- Machining centers
- Automatic plug-in machines
- Computer rooms
- CMM
- Precision electronic equipment
