LM5118MHX/NOPB
| Parameters | |
|---|---|
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5118 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~75V |
| Quiescent Current | 4.5mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 515kHz |
| Input Voltage (Max) | 75V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 5.5mA |
| Synchronous Rectifier | No |
| Max Frequency | 575kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | Yes |
LM5118MHX/NOPB Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 3V~75V. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 200kHz 515kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a terminal (s) on the switching converters that are designed at DUAL. Various 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. In addition to "LM5118", there are other relevant dc to dc converter ics you can find. There are only 20 pins on switching converter. Input voltage of dc dc voltage regulator must be 3V. Statistically, the DC regulator outputs 70V voltage. It should be noted that the dc to dc regulator only accepts 75V voltage as input voltage. normally, the dc dc regulator's output current is 3.5A, which you should keep in mind when starting a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 575kHz for this dc regulators. As long as the dc switching is in a dormant state, it utilizes 4.5mA. A controller's current should not exceed 5.5mA.
LM5118MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 515kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5118MHX/NOPB Applications
There are a lot of Texas Instruments LM5118MHX/NOPB DC to DC converter applications.
- Domestic water pumps
- Direct power supply system
- Geothermal power
- Smoke exhaust equipment
- Sensitive electronic devices
- Die casting equipment
- Printing
- Television equipment
- Correction machines
- seismic instrument power circuits
