LM5118Q1MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5118 |
| Function | Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~75V |
| Quiescent Current | 4.5mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck, Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 515kHz |
| Input Voltage (Max) | 75V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 575kHz |
| Max Duty Cycle | 80 % |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5118Q1MH/NOPB Overview
With a 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 3V~75V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. With this switching controller, you can switch at 200kHz 515kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. 20 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. You can find other relevant dc to dc converter ics by searching "LM5118". Total pins of switching converter are 20. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3V. A 70V voltage of DC regulator was detected in the test statistics. At most, the dc to dc regulator accepts 75V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 3.5A, so you should note it down when starting a new project. It is set to 80 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator575kHz has the maximum frequency. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. During dormancy, the dc switching uses 4.5mA.
LM5118Q1MH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 515kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM5118Q1MH/NOPB Applications
There are a lot of Texas Instruments LM5118Q1MH/NOPB DC to DC converter applications.
- Digital precision reference circuits
- Experimental setup
- Mobile phones
- Alternators
- Balance equipment
- Hydrogen power
- Current source circuits
- PSRR circuits
- Production lines
- Injection molding machinery
