LM5119PSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5119 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 36V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~65V |
| Quiescent Current | 6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~750kHz |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 6ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 5 ns |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 530kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5119PSQ/NOPB Overview
With a 32-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 5.5V~65V. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 50kHz~750kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Ramp, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . A variety of dc switching's functions can be performed on 32 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 36V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LM5119". Switching converter has a total of 32 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 5.5V. The test statistics indicate that DC regulator outputs a voltage of 800mV. It should be noted that the dc to dc regulator only accepts 65V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 3.3A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 530kHz for this dc regulators. As long as the dc switching is in a dormant state, it utilizes 6mA. The supply current is 6mA.
LM5119PSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~750kHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5119PSQ/NOPB Applications
There are a lot of Texas Instruments LM5119PSQ/NOPB DC to DC converter applications.
- Alternators
- Nuclear power plants
- Planers
- Pipe bending machines
- Cutting machine tools
- Arc suppression circuits
- Surface processing equipment
- Program control systems
- Flaw detection equipment
- Scientific research
