LM5121QMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5121 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 65V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~65V |
| Quiescent Current | 4mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 100% |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5121QMHX/NOPB Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 4.5V~65V. Worked in a -40°C~125°C TJ dc switcher before. Switching can be done at Up to 1MHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Frequency Control, Soft Start which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. LM5121 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 20 pins. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 100V. The Surface Mount makes DC switcher suitable for most applications and prototypes. To operate the voltage regulator dc to dc safely and reliably, users should apply 65V. Thare are switch converters of the Automotive, AEC-Q100 series. A dc switching in a dormant state uses 4mA.
LM5121QMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
LM5121QMHX/NOPB Applications
There are a lot of Texas Instruments LM5121QMHX/NOPB DC to DC converter applications.
- Automatic testing equipment
- Digital display device
- Hydrogen power
- Scientific testing
- Packaging
- Radio equipment
- Direct power supply system
- Die casting equipment
- Hydraulic presses
- SMT equipment
