LM5122MHE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5122 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~65V |
| Quiescent Current | 4mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Input Voltage (Max) | 65V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 100 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5122MHE/NOPB Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4.5V~65V. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at Up to 1MHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . An array of 20 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics will be returned if you search "LM5122". Total pins of switching converter are 20. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Based on the test statistics, DC regulator outputs voltage 100V. At most, the dc to dc regulator accepts 65V input voltage. You should note down the dc dc regulator's usual output current of 15A when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThe dc switching utilizes 4mA when it is in a dormant state.
LM5122MHE/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LM5122MHE/NOPB Applications
There are a lot of Texas Instruments LM5122MHE/NOPB DC to DC converter applications.
- Digital video recorders
- Computer rooms
- Correction machines
- Product burn-in
- CNC system
- Solar power plants
- Printing
- Domestic water pumps
- Injection molding machinery
- Balance equipment
