LM5122MHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5122 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 65V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~65V |
| Quiescent Current | 4mA |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Duty Cycle | 100 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5122MHX/NOPB Overview
The switching controller fits in the 20-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.5V~65V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. The switching controller can be switched at Up to 1MHz. The Surface Mount value makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. A variety of dc switching's functions can be performed on 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. A search for "LM5122" will reveal other relevant dc to dc converter ics. 20 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. DC regulator outputs 100V voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 65V. A dc switching in a dormant state uses 4mA. It runs on a supply current of 4mA.
LM5122MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
LM5122MHX/NOPB Applications
There are a lot of Texas Instruments LM5122MHX/NOPB DC to DC converter applications.
- Automation technology
- Precision electronic equipment
- Large fire protection systems
- Textile machinery
- Bending machines
- Flexible manufacturing cells
- Solar power plants
- Printing equipment
- Balance equipment
- Combined machine tools
