LM5175QPWPTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 55V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5175 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~42V |
| Quiescent Current | 1.65mA |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Input Voltage (Max) | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5175QPWPTQ1 Overview
It comes in a 28-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 3.5V~42V. Qualified to work in a -40°C~150°C TJ dc switcher. The switching controller can be switched at 100kHz~600kHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. An array of 28 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. LM5175 can be searched for other relevant dc to dc converter ics. There are 28 pins on switching converter. 3.5V should be the minimum input voltage for the dc dc voltage regulator. At most, the dc to dc regulator accepts 42V input voltage. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 55V so that the need can be met more directly. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. In dormant mode, 1.65mA is used.
LM5175QPWPTQ1 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 55V
LM5175QPWPTQ1 Applications
There are a lot of Texas Instruments LM5175QPWPTQ1 DC to DC converter applications.
- Terrestrial set-top boxes
- Gear/thread machining machines
- Alternators
- Injection molding machinery
- Computer rooms
- Printing
- Computer monitoring equipment of building
- Grinders
- Network technology
- Serial communication converter
