LM5176PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | OUTPUT IN ADJUSTABLE MODE IS 0.8V TO 55V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM5176 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.2V~55V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.2V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Input Voltage (Max) | 55V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 100% |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
LM5176PWPR Overview
Capsuled in the 28-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tape & Reel (TR) is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 4.2V~55V volts and has 4.2V~55V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. This switching controller can switch at 100kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . An array of 28 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. LM5176 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 28 pins. Input voltage of dc dc voltage regulator must be 4.2V. The dc to dc regulator is limited to 55V input voltage. To better satisfy the need, DC to DC voltage regulator has a value of OUTPUT IN ADJUSTABLE MODE IS 0.8V TO 55V.
LM5176PWPR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
OUTPUT IN ADJUSTABLE MODE IS 0.8V TO 55V
LM5176PWPR Applications
There are a lot of Texas Instruments LM5176PWPR DC to DC converter applications.
- Electric heating, lighting
- Computer-related products
- Household control circuits
- Domestic water pumps
- Scientific testing
- SMT equipment
- Laboratories
- Geothermal power
- Radio equipment
- Surge protection circuits
