LM5176QPWPTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ADJUSTABLE VOLTAGE FROM 0.8 TO 55V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5176 |
| JESD-30 Code | R-PDSO-G28 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.2V~55V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.2V |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Input Voltage (Max) | 55V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 100% |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LM5176QPWPTQ1 Overview
It comes in a 28-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.2V~55V. Suitable for a -40°C~150°C TJ dc switcher. The switching controller is capable of switching at the 100kHz~600kHz position. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of 28 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 24V volts. Search for "LM5176" to find other relevant dc to dc converter ics. Input voltage of dc dc voltage regulator must be 4.2V. At most, the dc to dc regulator accepts 55V input voltage. DC to DC voltage regulator has the value of ADJUSTABLE VOLTAGE FROM 0.8 TO 55V to better satisfy the requirement. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series.
LM5176QPWPTQ1 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ADJUSTABLE VOLTAGE FROM 0.8 TO 55V
LM5176QPWPTQ1 Applications
There are a lot of Texas Instruments LM5176QPWPTQ1 DC to DC converter applications.
- Linear guide
- Experimental setup
- Scientific testing
- Automation technology
- Direct power supply system
- Medical monitoring systems
- Computer application technology
- Plate bending machines
- Adjustable voltage or current linear circuits
- Balance equipment
