LM5642XMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5642 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 32.4V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~36V |
| Quiescent Current | 1.1mA |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 375kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 424kHz |
| Max Duty Cycle | 98.9 % |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5642XMHX/NOPB Overview
With its 28-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 2 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.5V~36V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 375kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Soft Start. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of 28 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Searching "LM5642" will return other relevant dc to dc converter ics. Switching converter has a total of 28 pins. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Test statistics indicate DC regulator outputs 32.4V voltage. Voltages 36V are the maximum that the dc to dc regulator will accept. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 98.9 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. The max frequency of the pmic can reach 424kHz. Dormant dc switchings use 1.1mA.
LM5642XMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 375kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98.9 %
LM5642XMHX/NOPB Applications
There are a lot of Texas Instruments LM5642XMHX/NOPB DC to DC converter applications.
- Medical equipment
- Network technology
- Die casting equipment
- Ball screw pair
- Elevator lighting
- Planers
- Communication system
- Scientific research
- Digital display device
- Magnetohydrodynamic power
