LM5642XMT

28 Terminals 4.5V~36V 28-Pin LM5642 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM5642XMT
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 635
Description: 28 Terminals 4.5V~36V 28-Pin LM5642 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Number of Pins	28
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Terminal Pitch	0.65mm
Frequency	375kHz
Base Part Number	LM5642
Function	Step-Down
Number of Outputs	2
Output Voltage	32.4V
Output Type	Transistor Driver
Max Output Current	20A
Input Voltage-Nom	5V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~36V
Quiescent Current	1.1mA
Control Features	Current Limit, Enable, Soft Start
Max Output Voltage	32.4V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Max Input Voltage	36V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	1.3V
Switcher Configuration	PUSH-PULL
Max Duty Cycle	98.9 %
Duty Cycle (Max)	98.9%
Length	9.7mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LM5642XMT Overview

In the 28-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~36V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Soft Start. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 28. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. Other relevant dc to dc converter ics can be found by searching "LM5642". There are only 28 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. A 32.4V voltage of DC regulator was detected in the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 20A. A duty cycle set at 98.9 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 375kHz is set for the switching controller. In dormant mode, 1.1mA is used. In order to ensure the dc switcher's functionality, users must limit the voltage to 36V due to the dc switcher's maximum input voltage. Voltage 4.5V is needed for the supply. An output current greater than 20A cannot be provided by the dc switcher. The switching converter can output 32.4V volts at its utmost, according to the datasheet. 1.3V voltage output is lower than 1.3V.