LM6134BIM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM6134 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Nominal Supply Current | 360μA |
| Output Current | 4mA |
| Current - Supply | 390μA |
| Slew Rate | 14V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 125nA |
| Max Input Voltage | 24V |
| Voltage - Supply, Single/Dual (±) | 1.8V~24V ±0.9V~12V |
| Output Current per Channel | 3.5mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 10MHz |
| Gain Bandwidth Product | 11MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 35V |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.18μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM6134BIM/NOPB Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. A General Purpose-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 14 terminations. There are a total of 14 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 14 pins on it. The input offset voltage is 6mV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You should keep the voltage gain at 100dB for the time being. On the output type, there are Rail-to-Rail different types of op amps. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. This electronic part is recommended to be used with an 390μA supply for best performance.
LM6134BIM/NOPB Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LM6134BIM/NOPB Applications
There are a lot of Texas Instruments LM6134BIM/NOPB Instrumentational OP Amps applications.
- Semiconductor detectors
- PDA
- Blood pressure sensors
- Signal filtering
- Tablets
- Multimedia playback equipment
- Displayers for aircraft and air transportation control systems
- Automation control systems
- Ultrasound transducers
- Professional videography
