LM6142AIMX
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Base Part Number | LM6142 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 650μA |
| Output Current | 24mA |
| Slew Rate | 25V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 174nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~24V ±0.9V~12V |
| Output Current per Channel | 24mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 9MHz |
| Unity Gain BW-Nom | 17000 kHz |
| Voltage Gain | 108.63dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 35V |
| Voltage - Input Offset | 1.3mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM6142AIMX Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Operational amplifier can operate supply current at 750μA. The voltage gain should stay at 108.63dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As a whole, there are 2 elements that make up this buffer amplifier. The linear amplifier is packaged by using a TR axis.
LM6142AIMX Features
8 Pins
supply voltage of 2.7V
108.63dB voltage gain
Output Type: Rail-to-Rail
LM6142AIMX Applications
There are a lot of Texas Instruments LM6142AIMX Instrumentational OP Amps applications.
- Proportional operation circuits
- Industrial control system
- Gaming industry
- Switching amplifier
- Digital cameras
- Signal filtering
- Television broadcasting equipment
- Biopotential
- Laptop
- Active probe
