LM6171AIM/NOPB

1 Channels 116mA per Channel 1μA 80 dB Instrumentational OP Amps 3.5μA 5.5V~34V ±2.75V~17V LM6171 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM6171AIM/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 240
Description: 1 Channels 116mA per Channel 1μA 80 dB Instrumentational OP Amps 3.5μA 5.5V~34V ±2.75V~17V LM6171 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	VIP™ III
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	LM6171
Pin Count	8
Number of Channels	1
Operating Supply Current	2.5mA
Nominal Supply Current	2.5mA
Output Current	116mA
Slew Rate	3600V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	80 dB
Current - Input Bias	1μA
Voltage - Supply, Single/Dual (±)	5.5V~34V ±2.75V~17V
Output Current per Channel	116mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	100MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	100000 kHz
Voltage Gain	84dB
Average Bias Current-Max (IIB)	3.5μA
Power Supply Rejection Ratio (PSRR)	85dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	NO
Micropower	NO
-3db Bandwidth	160MHz
Bias Current-Max (IIB) @25C	3μA
Programmable Power	NO
Input Offset Current-Max (IIO)	2μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM6171AIM/NOPB Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Voltage Feedback-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 1.5mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 2.5mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 84dB. There are a total of 1 channels available on the op amps. In this case, VIP? III represents the instrumentation amplifiers' series number.