LM6171BIM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM6171 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 2.5mA |
| Output Current | 116mA |
| Slew Rate | 3600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~34V ±2.75V~17V |
| Output Current per Channel | 116mA |
| Input Offset Voltage (Vos) | 8mV |
| Bandwidth | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 84dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM6171BIM/NOPB Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. Op amp ic rates 8mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. There should be no change in the voltage gain at 84dB. On this instrumentation amplifier, there are 1 circuits that are connected together. Op amp ic has 1 channels. This buffer amplifier is assigned within the VIP? III series by its manufacturer.
LM6171BIM/NOPB Features
8 Pins
supply voltage of 5V
84dB voltage gain
LM6171BIM/NOPB Applications
There are a lot of Texas Instruments LM6171BIM/NOPB Instrumentational OP Amps applications.
- Semiconductor detectors
- RF cable systems
- Blood pressure sensors
- Portable media players
- Logarithmic operation circuits
- Proportional operation circuits
- Communication device
- Multiplication circuits
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
