LM6171BIN/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM6171 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 2.5mA |
| Output Current | 116mA |
| Slew Rate | 3600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~34V ±2.75V~17V |
| Output Current per Channel | 116mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 160MHz |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 84dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 62MHz |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 2μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM6171BIN/NOPB Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. An op amp ic of the Voltage Feedback type. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 6mV. The mounting type that is recommended for this electrical part is Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits. There are a total of 1 channels available on the op amps. The VIP? III stands for the buffer op amp's serial number.
LM6171BIN/NOPB Features
8 Pins
supply voltage of 5V
84dB voltage gain
LM6171BIN/NOPB Applications
There are a lot of Texas Instruments LM6171BIN/NOPB Instrumentational OP Amps applications.
- Multiplication circuits
- High gain DC amplifier
- pH (acidity)
- Voltage regulation circuit
- Micro signal measurement
- Oscilloscopes
- Semiconductor detectors
- Broadcasting
- Weak signal detection
- Biopotential
