LM6172IM/NOPB
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 82dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 160MHz |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP™ III |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM6172 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Nominal Supply Current | 2.3mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Current - Supply | 4.6mA |
| Slew Rate | 3000V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1.2μA |
| Voltage - Supply, Single/Dual (±) | 5.5V~36V ±2.75V~18V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
LM6172IM/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 3mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is recommended to keep the voltage gain at 82dB at all times. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage. We recommend that you use this electronic part with an 4.6mA supply in order to get the best performance from it. The VIP? III represents the op amp's series number.
LM6172IM/NOPB Features
8 Pins
supply voltage of 5V
82dB voltage gain
LM6172IM/NOPB Applications
There are a lot of Texas Instruments LM6172IM/NOPB Instrumentational OP Amps applications.
- Power control
- Television
- Active probe
- Voltage regulation circuit
- Test equipment
- Automation control systems
- Weighing systems
- Cinema or auditorium audio system
- Wireless base stations
- Hand-held batteries
