LM629M-8
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | NMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM629 |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 8 |
| Output Voltage | 2.4V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 110mA |
| Output Configuration | Pre-Driver - Half Bridge (4) |
| Output Current | 1.6mA |
| Max Output Voltage | 2.4V |
| Supply Current-Max (Isup) | 100mA |
| Motor Type | Servo |
| Motor Type - AC, DC | Brushless DC (BLDC) Servo, Brushed DC Servo |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM629M-8 Overview
This package was designed with Tubein mind.Drivers controllers is packaged wDrivers controllersh a 24-SOIC (0.295, 7.50mm Width) case.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 4.5V~5.5V volts.Regarding the operating temperature, it is in the range of -40°C~85°C TA°C.There is a motor type Brushless DC (BLDC) Servo, Brushed DC Servoassociated with this motor type.The part has 24terminations available.Drivers controllers is recommended that this amplifier be run at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.Drivers controllers is based on the LM629 part number.24pins are present on the device.Drivers controllers is a part of the Motion Control Electronics series.8outputs are available in total.In this case, 2.4Vis maintained as the output voltage.Servocan be recognized as a motor type.With a 1.6mA output current, it offers maximal design flexibility.
LM629M-8 Features
Applications : General Purpose
base on LM629 number
designed with 8 outputs
Motor Type classified as Servo
LM629M-8 Applications
There are a lot of Texas Instruments LM629M-8 motor drivers applications.
- Charge pump circuits
- CHMSL (center high-mount stop lamps)
- A cross between entertainment
- Multiple output capability
- High brightness LED lighting
- Display LED backlighting
- High power LED street light
- Horticultural applications
- Automotive instrumentation
- Running preventive- maintenance diagnostics
