LM6511IM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LM6511 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Power Supplies | 2.7V |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 500mW |
| Output Current | 100mA |
| Max Supply Current | -2mA |
| Quiescent Current | 3.5mA |
| Response Time | 180 ns |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~30V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 130nA |
| Input Bias Current | 130nA |
| Voltage - Input Offset (Max) | 5mV @ 2.7V |
| Current - Input Bias (Max) | 0.13μA @ 2.7V |
| CMRR, PSRR (Typ) | 72dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM6511IM Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Open-Collector, TTL output is used here.The part is shipped by Tube .There are 8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.In general, the chip type can be classified as General Purpose .There are a total of 1 elements in it.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.Try search LM6511 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 3.5mA volts.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 3.5mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds -2mA .The device can be run with 2.7V power supplies.A maximum current of 130nA can be supplied to the device.From the voltage formula, the voltage gain of the part is 92.04dB .For normal operation, the operating supply voltage must be 28V .
LM6511IM Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3.5mA
Voltage Gain: 92.04dB
LM6511IM Applications
There are a lot of Texas Instruments LM6511IM linear comparators applications.
- General Purpose Low Voltage Applications
- Ultra-Low Power Systems
- Power management
- Window Comparators
- Portable and Battery-Powered Systems
- Wearable Devices
- Notebooks and PDAs
- Laptop Computers
- Building automation
- Appliances
