LM6511IM/NOPB
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LM6511 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.7V |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 500mW |
| Output Current | 100mA |
| Max Supply Current | -2mA |
| Quiescent Current | 3.5mA |
| Response Time | 180 ns |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~30V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 92.04dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 130nA |
| Voltage - Input Offset (Max) | 5mV @ 2.7V |
| Current - Input Bias (Max) | 0.13μA @ 2.7V |
| CMRR, PSRR (Typ) | 72dB CMRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
LM6511IM/NOPB Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Collector, TTL output type for this comparator.This package has been designed with Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.7V voltage.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 1 elements.A total of 8 pins are included.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 8 pins.Alternatively, you may search for LM6511 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 3.5mA .The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current be 3.5mA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds -2mA .A power supply of 2.7V is sufficient for the operation of the device.Comparator electronics follows that the voltage gain of the part is 92.04dB .
LM6511IM/NOPB Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3.5mA
Voltage Gain: 92.04dB
LM6511IM/NOPB Applications
There are a lot of Texas Instruments LM6511IM/NOPB linear comparators applications.
- Limit Comparators
- Motor drives
- Automotive
- Notebooks and PDAs
- Consumer Medical Electronics
- Security Detection Systems
- Ultra-Low Power Systems
- Threshold Detectors
- Window Comparators
- Zero-Crossing Detectors
