Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Max Power Dissipation |
500mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Base Part Number |
LM6511 |
Pin Count |
8 |
Output Type |
CMOS, Open-Collector, TTL |
Number of Elements |
1 |
Power Supplies |
2.7V |
Nominal Supply Current |
3.5mA |
Power Dissipation |
500mW |
Output Current |
100mA |
Max Supply Current |
-2mA |
Quiescent Current |
3.5mA |
Response Time |
180 ns |
Common Mode Rejection Ratio |
72 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~30V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
92.04dB |
Average Bias Current-Max (IIB) |
0.2μA |
Power Supply Rejection Ratio (PSRR) |
72dB |
Supply Voltage Limit-Max |
36V |
Max Input Current |
130nA |
Input Bias Current |
130nA |
Voltage - Input Offset (Max) |
5mV @ 2.7V |
Current - Input Bias (Max) |
0.13μA @ 2.7V |
CMRR, PSRR (Typ) |
72dB CMRR |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LM6511IMX Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Open-Collector, TTL output type for this comparator.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a part of Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM6511 .A quiescent current of 3.5mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 3.5mA .An excess of current supply over -2mA could result in malfunction of the comparator.The device can be operated with 2.7V power supplies.Electronic comparator is possible to input a maximum of 130nA current into the device.The voltage gain of the part is indicated by 92.04dB in the voltage formula.
LM6511IMX Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 3.5mA
Voltage Gain: 92.04dB
LM6511IMX Applications
There are a lot of Texas Instruments LM6511IMX linear comparators applications.
- RC Timers
- Simple Analog-to-Digital Converters (ADCs)
- Body Control Modules
- Set Top Boxes
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Consumer Medical Electronics
- Battery management and protection
- Window Comparators