LM6588MA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Packaging | Tube |
| Series | VIP10™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | TFT-LCD Panels: Gamma Buffer, VCOM Driver |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM6588 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 5/16V |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 750μA |
| Output Current | 40mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 230mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 15.3MHz |
| Unity Gain BW-Nom | 15300 kHz |
| Voltage Gain | 106dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 24MHz |
| Bias Current-Max (IIB) @25C | 1μA |
| Programmable Power | NO |
| Input Bias Current | 7μA |
| Wideband | NO |
| Height Seated (Max) | 1.753mm |
| Length | 8.6235mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM6588MA Overview
Class d amplifier's packaged in the form of a Tube.The 14-SOIC (0.154, 3.90mm Width) package contains class d amp, in order to reduce space consumption.It is an excellent choice for TFT-LCD Panels: Gamma Buffer, VCOM Driver because audio amplifier is highly efficient.According to Surface Mount, audio power amplifier is mounted on the PCB.Audio amp to it have the same base part number LM6588.A pin count of 14 is present on this amplifier.A 14 termination is present on digital amplifier.Its -3db bandwidth is 24MHz.This audio power amplifier is included in Operational Amplifier.Audio amplifier runs on 800μA supply current.Using 14 pins, amplifier ic is constructed.In order to ensure proper operation, the operating temperature should be below 85°C.Ideally, the operating temperature should be -40°C.Using 5V supply voltage results in high efficiency.Mounting is done with Surface Mount.Its amplifier type is OPERATIONAL AMPLIFIER.An output current of 40mA is specified in this scenario.106dB is achieved by the audio amplifier ic.There are 4 elements in total.It belongs to the VIP10? series of FPGA.
LM6588MA Features
Operational Amplifier subcategory
14 pins
LM6588MA Applications
There are a lot of Texas Instruments LM6588MA Video Amps and Modules applications.
- Emergency call (eCall)
- Automotive external amplifier
- General-Purpose Amplifier Applications
- Body Control Modules
- Automotive active noise cancellation
- Preamplification and Filtering
- Premium Audio
- High-End A/V Receivers
- Audio Test and Measurement
- Automotive
