LM6588MTX
| Parameters | |
|---|---|
| Output Current | 40mA |
| Slew Rate | 15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 72 dB |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 230mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 15.4MHz |
| Unity Gain BW-Nom | 15300 kHz |
| Voltage Gain | 106dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 24MHz |
| Bias Current-Max (IIB) @25C | 1μA |
| Programmable Power | NO |
| Input Bias Current | 7μA |
| Wideband | NO |
| Power | NO |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | TFT-LCD Panels: Gamma Buffer, VCOM Driver |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM6588 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/16V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 4 |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
LM6588MTX Overview
There is a Tape & Reel (TR) packaged wclass d amplifierh class d amplifier.14-TSSOP (0.173, 4.40mm Width) package reduces space by providing access to class d amp.It is an excellent choice for TFT-LCD Panels: Gamma Buffer, VCOM Driver because audio amplifier is highly efficient.audio power amplifier is mounted on the PCB based on the method of Surface Mount.With the use of 4 circuits, audio ic is able to achieve enhanced flexibility.Audio amp can be located using its base part number LM6588.The pin count is 14.14 terminations are present in digital amplifier.Its -3db bandwidth is 24MHz.In Operational Amplifier, this audio power amplifier is included.Audio amplifier runs on 800μA supply current.The amplifier is constructed with 14 pins.In order to ensure proper operation, the operating temperature should be below 85°C.Operating temperatures should not fall below -40°C.It is possible to achieve a high efficiency due to the 5V supply voltage.Surface Mount is used as its mounting method.This audio amplifier is equipped with a type OPERATIONAL AMPLIFIER amplifier.A value of 40mA is used in this scenario for the output current.A voltage of 106dB is gained by the audio amplifier ic.VIP10? is the series of this FPGA.
LM6588MTX Features
Operational Amplifier subcategory
14 pins
LM6588MTX Applications
There are a lot of Texas Instruments LM6588MTX Video Amps and Modules applications.
- High-End A/V Receivers
- Set-Top Box
- Automotive active noise cancellation
- Microphone Preamplifiers
- Telematics control unit
- High-Fidelity (HiFi) Headphone Drivers
- Analog and Digital Mixing Consoles
- Professional Audio Equipment
- Professional Audio Equipment
- Preamplification and Filtering
