LM675T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Number of Pins | 5 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 30W |
| Technology | BIPOLAR |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | LM675 |
| Pin Count | 3 |
| Operating Supply Voltage | 30V |
| Number of Channels | 1 |
| Operating Supply Current | 18mA |
| Nominal Supply Current | 18mA |
| Power Dissipation | 30W |
| Output Current | 3A |
| Slew Rate | 8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Power |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 10V~60V ±5V~30V |
| Output Current per Channel | 3A |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 5.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -25V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max Junction Temperature (Tj) | 150°C |
| Height | 4.7mm |
| Length | 14.986mm |
| Width | 10.16mm |
| Thickness | 4.572mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM675T/NOPB Overview
It is packaged in an TO-220-5 Formed Leads-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the Power-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 5. A total of 3 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 25V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . You can run this op amp ic on 18mA . 90dB should be the voltage gain. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 30V voltage.
LM675T/NOPB Features
3 Pins
supply voltage of 25V
90dB voltage gain
LM675T/NOPB Applications
There are a lot of Texas Instruments LM675T/NOPB Instrumentational OP Amps applications.
- High gain DC amplifier
- Strain gauges
- Laptop
- Industrial applications including automation
- Active probe
- Video conversion and routing
- Wireless base stations
- Blood pressure sensors
- Video amplifiers
- Commercial audio systems
